Sanyo XG-705A - Manual (Page 84)

84
Screen
You can select a screen mode on this screen. The items displayed on this screen is
automatically changed according to the input signal.
✳
If “1080i”, 1035i”, or “720p” scan mode is selected from “System Adjustment” (Y, Pb/Cb, Pr/Cr input
only) setting in “SYSTEM” screen, you cannot configure “Screen” settings.
Sound
On this screen, you can adjust the sound volume of the projector.
Parameter Description
Parameter Description
Aspect ................Select “Normal”, “True*”, “Wide”, or
“Full screen*”.
Digital Zoom* ....Click “+” or “_” button to enlarge or
minimize the screen size. Click “OFF”
to cancel this function.
* Items only for Wireless, Wired Computer1 (Analog) or
Computer2 (RGB) input mode.
Volume ..............Click 7 8 to adjust the volume.
Mute ..................Click “ON” to mute the sound and
“OFF” to cancel this function.
10. How to Use the PJ Controller