Sanyo XG-705A - Manual (Page 50)

50
6. Configurations with Browser
With this screen, you can set the User PIN code to transfer the image to the projector and to
activate PJ Controller.
You can set different PIN code as you set for Admin Password (p.49).
When you reset the User PIN code, you do not need to enter the current PIN code.
At the factory setting, the User PIN code is not set.
If you do not need to set a PIN code, enter " 0000 " .
Parameter Description
Enter New User PIN code ..........Enter a new PIN code you wish to set. The PIN code you have
entered is displayed as “
●●●●” (four-digit numbers).
Re-enter New User PIN code ........Re-enter the new PIN code you wish to set. The PIN code you have
entered is displayed as “
●●●●” (four-digit numbers).
APPLY button ..................................Click the APPLY button to update. The screen to restart the projector will be
displayed.
User PIN code