Sanyo XG-705A - Manual (Page 68)

68
9. How to Use Network Viewer
2) Operating with the Browser
1. Select “Wireless” for Wireless LAN and “Wired” for Wired LAN from the input menu of the
projector.
Activate “NetworkModule Client” or “NetworkModule Moderator”.
Operating directly from the browser is also possible. In this case, enter the projector IP
address directly into browser’s address bar.
Configure
NetworkModule
button
2. Specify the projector to display the image
Only one projector can be selected.
3. Click “NetworkModule Setting” button (see page 39).
The browser will start and projector setting screen will appear.
Select Network Viewer from the MENU.
Network viewer operation (next page) will appear.