Chapter 11 – Sun Microsystems Netra 120 User Manual
Page 155
11-1
C H A P T E R
11
Replacing a Server or Replacing
Individual Components
If you ever need to replace an entire Sun Fire V120 or Netra 120 server, this chapter
describes how to transfer the old server’s configuration information (including its
MAC address, serial number and NVRAM settings) to a new server by using the old
server’s configuration card.
The chapter also lists the field replaceable units (FRUs) that you might need to order
for your server during its life-time.
Finally, this chapter describes how to install the main FRUs, for example, the system
board, power supply, and fans.
The chapter contains the following sections:
■
Section 11.1, “Replacing a Server” on page 11-2
■
Section 11.2, “Field Replaceable Units” on page 11-4
■
Section 11.3, “Replacing the Memory Card Reader for the System Configuration
Card” on page 11-5
■
Section 11.4, “Replacing the DVD or CD-ROM Drive, Cable, and Paddleboard” on
page 11-7
■
Section 11.5, “Replacing the NVRAM Chip” on page 11-9
■
Section 11.6, “Replacing the System Board” on page 11-12
■
Section 11.7, “Replacing the Power Supply Unit” on page 11-17
■
Section 11.8, “Replacing the Rear Fan Subassembly (Fans 1 and 2)” on page 11-19
■