Sun Microsystems Netra 120 - Manual (Page 67)

Chapter 5 Installing the Server Into a Rack 5-3
5.1.2 Assembling the Slides and Mounting the Server
1. Position the two parts of the slide so that the double-angled ear (A) is in the
correct position for the rack you are installing into.
■ For the Sun 72-inch tall (19-inch wide) rack, the double-angled ear (A) must be to
the rear (see
FIGURE 5-2 ).
■ For a standard 19-inch wide rack, the double-angled ear (A) must be to the front
(see
FIGURE 5-3 ).
FIGURE 5-2 Positioning the Slide Mounts for a Sun StorEdge 72-Inch Tall Rack
FIGURE 5-3 Positioning the Slide Mounts for a Standard 19-Inch Wide Rack
A
A