Sony CMT-C7NT - Manual (Page 13)

13
CD
Labeling a CD
— Disc Memo
You can label up to 100 CDs with titles of up
to 20 symbols and characters. Whenever you
load a labeled CD, the title appears in the
display.
Note
When labeling CDs for the first time, be sure
to first press FUNCTION repeatedly until
“CD” appears in the display, and then erase
all disc titles using the procedure “Erasing a
disc title” on page 14.
1
Press FUNCTION repeatedly until “CD”
appears in the display.
If “SHUF” or “PROGRAM” appears in the
display, press PLAY MODE on the remote
repeatedly until both disappear.
2
Press NAME EDIT/SELECT on the
remote.
The cursor starts flashing.
3
Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
The display changes as follows:
Selected AB* (Upper cases) t Selected
ab* (Lower cases) t Selected 12
(Numbers) t Selected AB* (Upper cases)
t …
* Press number 1 repeatedly to display the
following symbols.
‘ – / , . ( ) : ! ?
In addition, when the symbols above appear in
the display, press . or > repeatedly to
display the following symbols.
& + < > _ = ” ; # $ % @
`
4
Enter a character.
If you have selected uppercase or
lowercase letters
1 Press the corresponding letter button on
the remote repeatedly until the
character to be entered flashes.
Or, press the button once and press .
or > repeatedly.
2 Press CURSOR t on the remote.
The flashing character is entered and the
cursor shifts to the right.
If you have selected numbers
Press the corresponding number button on
the remote.
The number is entered and the cursor shifts
to the right.
To enter a blank space
1 Press NAME EDIT/SELECT on the
remote to select uppercase or
lowercase letters.
2 Press 10/0 on the remote.
A blank space is entered and the cursor
shifts to the right.
5
Repeat steps 3 and 4 to enter the rest
of the name.
To change a character
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
6
Press ENTER/YES on the remote to
complete the labeling procedure.
To cancel labeling
Press MENU/NO on the remote.
continued