Sony CMT-C7NT - Manual (Page 47)

47
Timer
To
Check the settings/
activate the timer
Change the setting
Turn off the timer
Notes
• The system will turn on 30 seconds before the
specified starting time. Do not operate the system
from the time the system turns on until the daily
timer starts. Otherwise the timer will not be
activated correctly.
• You cannot use the optional component connected
to TAPE IN jack or DIGITAL OPTICAL IN jack as
the sound source for Daily Timer.
Do this
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“DAILY SELECT?” appears in
the display, and then press
ENTER/YES on the remote.
Start over from step 1.
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“TIMER OFF?” appears in the
display, and then press
ENTER/YES on the remote.
Timer recording radio
programs
Before recording with the timer, make sure that
you have set the system clock correctly (see
“Setting the time” on page 8) and preset the
radio station (see “Presetting radio stations” on
page 42).
1
Tune in the desired preset radio station
(see “Listening to the radio” on page
43).
2
Press CLOCK/TIMER SET on the
remote.
3
Press . or > on the remote
repeatedly until “REC SET?” appears in
the display, and then press ENTER/YES
on the remote.
4
Press . or > on the remote
repeatedly to select one of “REC 1” to
“REC 3”, and then press ENTER/YES
on the remote.
5
Press . or > on the remote
repeatedly until “ONCE?”, “DAILY?” or
“WEEKLY?” appears.
If you select “ONCE?”, the recording timer
activates only once. If you select
“DAILY?”, the timer activates at the same
time every day. If you select “WEEKLY?”,
the timer activates at the same time on the
set day of every week.
6
Press ENTER/YES on the remote.
If you select “ONCE?” or “WEEKLY?”,
the day indication starts flashing. If you
select “DAILY?”, the hour indication starts
flashing.
continued