Sony CMT-C7NT - Manual (Page 23)

23
MD — Recording
To add “LP:” at the beginning of a
track name during MDLP recording
“LP:” appears when you try to play the track on
a system that does not support MDLP mode.
This convenient function lets you know at a
glance that the track cannot be played back.
The factory setting is “On”.
1 Press FUNCTION on the remote
repeatedly until “MD” appears in the
display.
2 Press MENU/NO on the remote.
3
Press . or > repeatedly until
“Setup?” appears in the display, and then
press ENTER/YES on the remote.
4 Press . or > repeatedly until “LP
Stamp On” (or “LP Stamp Off”) appears,
and then press ENTER/YES on the remote.
5 Press . or > to select the setting, and
then press ENTER/YES on the remote.
To Select
Add “LP” LP Stamp On (factory
setting)
Cancel adding “LP” LP Stamp Off
6 Press MENU/NO on the remote.
Notes
• The recorded “LP:” is a stamp which appears to
indicate that the track cannot be played back when
you try to play the track on system that does not
support MDLP mode. It does not appear for systems
that support MDLP mode.
• When set to “On”, “LP:” is recorded as the track
name, so the number of characters that can be input
to an MD is reduced. In addition if you divide an
“LP:” track using the Divide function, “LP:” is also
added to the latter track.
continued
6
Press . or > repeatedly to select
the recording mode you want, and then
press ENTER/YES on the remote.
The display changes as follows:
STEREO REC t LP2 REC t LP4 REC
t MONO (Monaural) REC t STEREO
REC
t …
7
Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
Tip
The selected recording mode is kept even after
recording has finished, so be sure to check the
recording mode before recording.
Notes
• Tracks recorded in MDLP (LP2 or LP4) Stereo
mode cannot be played back on a system that does
not support MDLP mode.
• During recording or recording pause, you cannot
change the recording mode.
• Even if you select “MONO REC”, the monitor
signal during recording does not become monaural.