After recording, Recording a cd on an md – Sony CMT-C7NT User Manual
Page 19
19
MD — Recording
Recording a CD on an MD
— CD-MD Synchro Recording/CD-MD
High-Speed Synchro Recording
In addition to normal-speed recording, you can
make a digital recording of a CD on an MD at
twice the speed of normal CD-MD Synchro
Recording.
1
Load a recordable MD.
2
Load a CD.
3
Press FUNCTION repeatedly until “CD”
appears in the display.
You can use the Group function with the
CD-MD (High-Speed) Synchro Recording
feature to create new tracks in a group. You
can also add the tracks following previously
recorded group tracks (see page 27).
4
Press CD SYNC NORMAL.
To record at high speed (CD-MD High-
Speed Synchro Recording), press CD
SYNC HIGH.
“NORMAL SPEED” and “NORM” (or
“HIGH SPEED” and “HIGH” for high-
speed recording) appears. The MD deck
stands by for recording and the CD player
pauses for play.
5
Press
u
(or MD
N
on the remote).
Recording starts. You cannot monitor the
recorded signal during high-speed
recording.
continued
When you use a partially recorded
MD
Recording starts after the recorded tracks.
Note on MD track numbers
On an MD, the track numbers (track sequence), track
start and end point information, etc., are recorded in
the TOC*
2
area independent of the sound information.
You can edit recorded tracks quickly by modifying
the TOC information.
*
2
TOC: Table Of Contents
After recording
Press MD
Z
to remove the MD or press
?/1
(power) to turn off the system.
“TOC” starts flashing. The TOC is updated and
recording is completed.
Before pulling out the power cord
MD recording is completed when the MD
Table of Contents (TOC) is updated. The TOC
is updated when you eject the MD or press ?/1
to turn off the system. Do not pull out the
power cord before updating the TOC (while
“TOC” is lit) or while updating the TOC (while
“TOC” is flashing) to ensure a complete
recording.
Protecting a recorded MD
To protect a recorded MD, slide the tab on the
side of the MD to open the slot. In this position,
the MD cannot be recorded. To record on the
MD, slide the tab to close the slot.
Tab
Slide the tab