Sony CMT-C7NT - Manual (Page 16)

16
5
To program additional tracks, repeat
steps 3 and 4.
6
Press u (or MD N on the remote).
To Do this
Program the desired
track using the
number buttons on
the remote
Press . or >
repeatedly during Program
Play.
Press TIME on the remote in
stop mode. The total number
of programed steps appears,
and then the last programed
track number and the total
playing time of the program.
Press x, and then press
PLAY MODE on the remote
repeatedly until
“PROGRAM” and “SHUF”
disappear from the display.
Do steps 3 and 4 with
Program Play stopped.
Check the program
order
Check the total
number of programed
tracks
Cancel Program Play
Add a track to the end
of the program
Erase the last
programed track Press CLEAR on the remote
in stop mode. Each time you
press the button, the last
programed track is erased.
Press number buttons instead
of performing steps 3 to 5.
For details on using number
buttons, see page 15.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, switch
the function to MD, and press u (or MD N on
the remote).
• “---.--” appears when the total MD program time
exceeds 1000 minutes.
Programing the MD tracks
— Program Play
You can make a program of up to 25 tracks on
an MD in any order that you want.
1
Press FUNCTION repeatedly until “MD”
appears in the display.
2
Press PLAY MODE on the remote in
stop mode repeatedly until
“PROGRAM” appears in the display.
3
Press . or > repeatedly until the
desired track number appears in the
display.
4
Press ENTER/YES on the remote.
The track is programed.
“Step” appears, followed by the order
number of the track just programed. Then
the number of the last programed track
appears, followed by the total playing time
of the program. If you have made a mistake,
you can clear the last programed track from
the program by pressing CLEAR on the
remote.
Selected track
number Playing time of the
selected track
Last programed
track number Total playing time