Sanyo DRW-500 - Manual (Page 10)

-E9-
3
4
RF OUTPUT CHANNEL
VIDEO
S-VIDEO AUDIO
ANTENNA
L
R
AV 1 IN
OUT IN
VHF/UHF
ANTENNA
IN
3
4
RF OUTPUT CHANNEL
1
2
3
Example: Basic Antenna/Cable Connections
1. Connect an antenna (or a cable TV system) to the unit.
2. Set the RF OUTPUT CHANNEL switch to “3” or “4”.
3. Connect the unit to the TV with the 75-ohm coaxial antenna
cable (supplied).
Channel Switch Setting
Set your TV to either channel 3 or channel 4. (Choose a
channel that is not used for broadcasting in your area.)
Then set the RF OUTPUT CHANNEL switch to channel 3 or 4
to match the channel selected on the TV. This is your unit
channel.
The TV must be set to this channel whenever the unit is used
for playing a disc or watching a TV program.
If in doubt, check with your local cable company.
75-ohm coaxial
antenna cable
(not supplied)
DVD recorder
(Partial back panel)
TV
75-ohm coaxial antenna cable (supplied)
Need help? Call
1-800-813-3435
Cable TV wall jack
or