Sanyo DRW-500 - Manual (Page 51)

-E50-
a (Play)
DISPLAY
PROG
n (Stop)
SHUFFLE
Number
buttons
CLEAR
To Check the Disc Playing Time
Press [DISPLAY] during playback.
Each time the button is pressed, the various playing times will
appear on the TV screen.
Examples (DVD-Video, DVD+RW, DVD+R):
TITLE 01/02 CHAPTER 015/035
00 : 50 : 09
TITLE REMAIN (Title remaining playing time)
01 : 10 : 20
CHAPTER ELAPSED (Chapter elapsed playing time)
00 : 01 : 25
CHAPTER REMAIN (Chapter remaining playing time)
00 : 01 : 34
Released
Examples (CD):
SINGLE ELAPSED (Track elapsed playing time)
00 : 00 : 54
SINGLE REMAIN (Track remaining playing time)
00 : 02 : 59
TOTAL ELAPSED (Disc elapsed playing time)
00 : 01 : 05
TOTAL REMAIN (Disc remaining playing time)
00 : 45 : 34
OFF (Released)
Press [DISPLAY] repeatedly until all playing times disappear.
Need help? Call
1-800-813-3435
Important Note:
If “ ” appears on the TV screen during operation, the
operation is prohibited by the unit or the disc.
Shuffle Playback [CD]
1. Press [SHUFFLE] in the stop mode.
• “SHUFFLE ON” appears briefly on the TV screen.
• “SHUFF” appears on the FL display.
2. Press [a] (Play) to start shuffle playback.
The unit will automatically select tracks at random.
Note:
To stop shuffle playback, press [n], and then press [SHUFFLE].
“SHUFFLE OFF” appears briefly on the TV screen.
Programmed Playback [CD]
Up to 99 selections can be programmed.
Programming procedure
1. Press [PROG] in the stop mode.
• “PROGRAM P00:00” appears on the TV screen.
• “PROG” appears on the FL display.
2. Press the number buttons to select the track number.
Examples:
To select Track No.3, press [3].
To select Track No.10, press [+10], then [0].
To select Track No.24, press [+10], [+10], then [4].
Example:
PROGRAM P01:03
(The Track No.3 is set to the first programmed number.)
Note:
If you make a mistake, press [CLEAR].
3. Repeat step 2 as above to select other tracks.
Examples:
PROGRAM P02:10
PROGRAM P03:24
4. Press [a] (Play) to start programmed playback.
When all programmed selections have been played, the unit
stops automatically.
•
The programmed contents are retained in memory.
If [a] (Play) is pressed again, programmed playback
starts.
Note:
To cancel the program, press [PROG] (“PROGRAM P00:00”
appears) in the stop mode, and then press [n].