Sanyo DRW-500 - Manual (Page 36)

-E35-
Record Show
Press SETUP to exit
Press to change settings. 4
5
5
4
10 TV Done
Back
Record Show
21:30
Tuner
12
SP
20040503
Start
22:00
2004/05/03
End
Verify the settings. Press ENTER to edit.
Done Cancel Press SETUP to exit
Record Time
Record Day
Input Source
TV
Record Mode
Title
4, 5, a, b
ENTER
Record Show
21:30
Tuner
10
SP
20040503
Start
22:00
2004/05/03
End
Verify the settings. Press ENTER to edit.
Done Cancel Press SETUP to exit
Record Time
Record Day
Input Source
TV
Record Mode
Title
Record Show
21:30
Tuner
10
SP
20040503
Start
22:00
2004/05/03
End
Verify the settings. Press ENTER to edit.
Done Cancel Press SETUP to exit
Record Time
Record Day
Input Source
TV
Record Mode
Title
Record Show
21:30
Tuner
10
SP
20040503
Start
22:00
2004/05/03
End
Verify the settings. Press ENTER to edit.
Done Cancel Press SETUP to exit
Record Time
Record Day
Input Source
TV
Record Mode
Title
Record Show
21:30
AV1
SP
20040503
Start
22:00
2004/05/03
End
Verify the settings. Press ENTER to edit.
Done Cancel Press SETUP to exit
Record Time
Record Day
Input Source
TV
Record Mode
Title
Record Show
Press SETUP to exit
Press to change settings. 4
5
5
4
Tuner Input Source Done
Back
Setting “TV”
Select the TV channel number.
Note:
If “AV1” or “AV2” is selected for the Input Source, the channel
number does not appear. Skip this section.
1. Select “TV”.
Example:
2. Press [ENTER].
“TV” screen appears.
Example:
3. Press [o] or [p] to select the TV channel number.
4. Press [ENTER] (or [a]) to select “Done”.
5. Press [ENTER].
The TV channel number is set.
The screen returns.
Example:
Setting “Input Source”
1. Select “Input Source”.
Example:
2. Press [ENTER].
“Input Source” screen appears.
3. Press [o] or [p] to select “Tuner”, “AV1” or “AV2”.
4. Press [ENTER] (or [a]) to select “Done”.
5. Press [ENTER].
The recording input source is selected.
The screen returns.
Examples: