Sanyo DRW-500 - Manual (Page 33)

-E32-
a
4
Menu
Play/Edit Disc
Record Program
Setup Menu
Press SETUP to exit
Recording Setup
DVD Control
General
Video
Audio
AV Select
5
a
AV Select
AV1 Select
AV2 Select
Video
S-Video
Press SETUP to exit Current selection
AV Select
5
b AV1 Select
AV2 Select
Video
S-Video
Press SETUP to exit Current selection
SETUP
4, 5, a, b
ENTER
When the 1st AV input (AV1 IN) or 2nd AV input (AV2 IN) jacks
are connected, you must set as follows:
Preparations
(AV Select ---> AV1 Select & AV2 Select)
1. Select “Setup Menu” in “Menu” screen. See page E22.
AV Select
2. Press [ENTER] (or [a]).
“Recording Setup” is highlighted.
3. Press [p] to select “AV Select”.
4. Press [ENTER] (or [a]).
“AV Select” screen appears.
Setting “AV1 Select” and “AV2 Select”
1. Press [p] or [o] to select “AV1 Select” or “AV2 Select”.
AV1 Select: When AV1 IN jacks are used
AV2 Select: When AV2 IN jacks are used
2. Press [ENTER] (or [a]) to select the sub menu.
Need help? Call
1-800-813-3435
3. Press [p] or [o] to select the video input jack.
Video: Using VIDEO input jack
S-Video: Using S-VIDEO input jack
4. Press [ENTER]. “ √” appears.
5. Press [b] to return to “AV1 Select” or “AV2 Select”.
6. Repeat steps 1 ~ 5 as necessary.
Notes:
•
Press [b] again to return to “Menu” screen.
• Press [SETUP] to close the screen.