Sanyo DRW-500 - Manual (Page 23)

-E22-
SETUP
5
4
POWER
5
a
4
Menu
Play/Edit Disc
Record Program
Setup Menu
Record Status
Record List
Press SETUP to exit
a
4
Menu
Play/Edit Disc
Record Program
Setup Menu
Press SETUP to exit
Recording Setup
DVD Control
General
Video
Audio
AV Select
5
a
Menu
Play/Edit Disc
Record Program
Setup Menu
Play/Edit Titles
Edit Disc
Press SETUP to exit
Common Procedure
• See “SETTING THE CLOCK” on pages E18 and “TUNER
SETTING” on pages E19 first.
• Turn on the TV and select the appropriate video input to suit
the connections to this unit. (Refer to your TV’s owner manual.)
• Press [n] before setting if the unit is receiving the TV program.
1. Press [POWER] to turn on the power.
• “POWER ON” appears briefly on the FL display.
• “SANYO” logo appears on the TV screen.
2. Press [SETUP] in “NO DISC” mode or full stop mode.
“Menu” screen appears on the TV screen.
3. Press [p] (or [o]) to select the desired menu and go to the
reference page.
Need help? Call
1-800-813-3435
BEFORE INITIAL SETTING
Important Note:
• In this instruction manual, the language in on-screen display
is English.
If you change the language, please follow the selected
language in on-screen display.
• You may need extra instructions during the setting. If a
message appears, please follow the instructions displayed
on the TV screen.
• For improvement, on-screen display subject to change
without notice.
See page E33.
See page E37.
See page E23.
See page E25.
See page E29.
See page E30.
See page E31.
See page E32.
Note:
When a disc is loaded, “Play/Edit Disc” can be selected.
See page E55.
See page E57.