Example: connecting a cable box, Need help? call – Sanyo DRW-500 User Manual
Page 11
-E10-
TO TV
ANT. IN
VHF/UHF
ANTENNA
IN
3
4
RF OUTPUT
CHANNEL
VIDEO
S-VIDEO
AUDIO
ANTENNA
L
R
AV 1 IN
OUT
IN
3
4
RF OUTPUT
CHANNEL
VIDEO
S-VIDEO
AUDIO
ANTENNA
L
R
AV 1 IN
OUT
IN
VHF/UHF
ANTENNA
IN
Example: Connecting a Cable Box
This unit can receive all unscrambled cable channels without the use of a cable box. If you wish to view and record scrambled cable
channels, you must connect a cable box as described below.
Your local cable TV company will advise you of the channels available in your area.
We recommend that you consult your cable TV company to make sure that the cable is properly connected.
TV
CATV
75-ohm coaxial
antenna cable
(not supplied)
DVD recorder
(Partial back panel)
Cable box (not supplied)
75-ohm coaxial antenna
cable (supplied)
75-ohm coaxial antenna cable (not supplied)
TV
CATV
75-ohm coaxial antenna
cable (not supplied)
DVD recorder
(Partial back panel)
Cable box (not supplied)
75-ohm coaxial antenna cable (supplied)
Example:
Connecting a cable box with many scrambled channels
Use this connection if your cable system scrambles all or most
channels.
Connect the cable box to the unit first.
Notes:
•
The unit and TV receive the same channel. Be sure that the
cable box is turned on.
•
Recording one channel while watching another channel is
not possible.
Example:
Connecting a cable box with only a few scrambled channels
Use this connection if your cable system scrambles only a few
channels.
Connect the cable box between the unit and the TV.
Notes:
•
You can record any non-scrambled channel by selecting the
channel on the unit.
•
You cannot record scrambled channels that require a cable
box.
Need help? Call
1-800-813-3435