Sanyo DRW-500 - Manual (Page 14)

-E13-
VIDEO
S-VIDEO AUDIO DIGITAL
AUDIO
L
R
OUT
COMPONENT VIDEO OUT
VIDEO
S-VIDEO AUDIO DIGITAL
AUDIO
L
R
OUT
Example:
Connecting to an Amplifier with Dolby Digital Decoder or DTS Decoder
Connect the audio cable and/or coaxial digital cable or optical digital cable.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
To digital audio input Amplifier with Dolby Digital Decoder
or DTS Decoder
*Please consult your local audio/video dealer.
Front right
speaker
Center
speaker
Subwoofer
Front left
speaker
Surround left
speaker Surround right
speaker
To enjoy Dolby Digital or DTS sound
Set “Digital Out” to “ON” in “Audio Setup” screen. See page E31.
or
or
To Coaxial DIGITAL
AUDIO OUT jack
*Coaxial digital cable
(not supplied)
To Optical DIGITAL
AUDIO OUT jack
*Optical digital cable
(not supplied)
DVD recorder
(Partial back panel)
Before connecting, remove the
protective cap from the jack. Replace
the cover when the jack is not in use.
Example:
Connecting to an Amplifier with Dolby Pro Logic Decoder
Amplifier with Dolby Pro Logic Decoder
Front right
speaker
Center
speaker
Subwoofer
Surround left
speaker
Front left
speaker
*Please consult your local audio/video dealer.
Surround right
speaker
*Audio cable
(not supplied)
To AUDIO OUT jacks
To AUDIO INPUT jacks
Note:
Please refer to your amplifier instruction manual.
DVD recorder
(Partial back panel)