Smart Technologies Unifi 45 - Manual (Page 13)

99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 5
Before Installing Your Unifi 45 Projector Retrofit Kit
In This Chapter
For instructions on installing your Unifi 45 projector retrofit kit, consult the installation documents found in your
Unifi 45 projector boxes. Use these materials, including the projector and ECP mounting templates, to install your
system.
The following sections in this chapter include additional information, optional installation procedures and tips
to consider before you install your SMART Board interactive whiteboard system.
• Environmental Requirements (page 6)
• Before Installing Your Interactive Whiteboard System (page 7)
– Recommended Heights for Mounting (page 7)
• After Installing Your Interactive Whiteboard System (page 8)
– Adjusting Image Alignment (page 8)
– Preparing the Unifi 45 Projector Boom Height and Mirror for Alignment (page 9)
– Focusing and Aligning the Image (page 14)