Smart Technologies Unifi 45 - Manual (Page 30)

22 Connecting Your Interactive Whiteboard System 99-00881-20 A0
Connecting Peripheral Visual or Audio-Visual Devices
To connect a DVD player, VCR, document camera, digital camera or other visual or audio-visual peripherals
to the SMART Board interactive whiteboard system, you must connect your peripheral’s video and audio outputs
to the ECP. You can have up to three peripheral devices and a host computer connected at one time.
1. Turn off your SMART Board interactive
whiteboard system.
2. Connect the device’s video cables to the ECP
using the appropriate inputs. Input 2 is the
VGA connector, input 3 is the S-video 4-pin
mini-DIN connector and input 4 is the
composite video input connector.
3. For each peripheral device, connect the
device’s audio cables to the associated red
and white RCA jacks next to the appropriate
video input connector.
To connect S-video, composite and other audio-visual inputs for peripheral devices
IMPORTANT If you have peripheral devices that don’t use a 4-pin mini-DIN connectors or an RCA composite
video jack, or if your device has an audio connection that doesn’t use RCA jacks, you might
need to purchase third-party adapters.