Smart Technologies Unifi 45 - Manual (Page 29)

99-00881-20 A0 Connecting Your Interactive Whiteboard System 21
Connecting Audio/Visual Outputs from Your Guest Computer to Your Interactive Whiteboard System’s
ECP Input
1. Make sure that you have a shielded VGA cable
(not included) and an audio cable with 3.5 mm plugs
(optional, not included) long enough to connect your
guest computer to your ECP.
2. Connect the VGA cable to the VGA input connector
on the bottom of your ECP.
3. If you’re connecting audio, connect your audio cable
to the audio input jack next to the VGA input
connector.
4. Connect the other end of your VGA cable
to your computer’s video output connector.
5. Connect the other end of the audio cable to your
computer’s audio output.
IMPORTANT It is recommended that you reserve the VGA connector on the ECP to install your guest
computer’s video output. If you will not have guest computers, you can use the VGA connector
on the ECP to install your host computer’s video output.
To connect your guest computer’s video or audio output to your ECP input
IMPORTANT Your interactive whiteboard system doesn’t include speakers. If you want to hear sound,
you need to connect an audio system to the projector’s audio output. Consult your authorized
SMART reseller to determine your audio output options.