Smart Technologies Unifi 45 - Manual (Page 25)

99-00881-20 A0 Before Installing Your Unifi 45 Projector Retrofit Kit 17
6. Use the included hex key to adjust hex screw 3 to change the size of the image.
NOTE: Adjusting this screw may affect the other adjustments.
7. Repeat steps 1 through 6, using smaller increments. Adjust the image so that the top corners
of the projected image fit into the top corners of the interactive whiteboard’s screen.
8. When you are finished adjusting the image size, adjust the focus if necessary.
Hex Screw 3