Sony HDC-F950 - Manual (Page 100)

Chapter 4 Adjustments and Settings for Recording
4-6(E)
Chapter 4 Adjustments and Settings for Recording
4-3 Viewfinder Screen Setup Menu Displays
When the DISPLAY switch is set to MENU, the
OPERATION menu will be displayed on the
viewfinder screen. The OPERATION menu is
displayed one page at a time.
The OPERATION menu is used to select various
setting values, and to select items which will be
displayed on the viewfinder screen and how those
items will be displayed.
About the TOP menu
The TOP menu displays the overall organization of the
various menus.
TOP menu
Note
The TOP menu contents vary based on the settings of
switches on the SG board inside the camera.
For more information, refer to the Installation &
Maintenance Manual.
To display the TOP menu screen
Move the DISPLAY switch from OFF to MENU while
pressing the STATUS/CANCEL switch toward
STATUS.
The TOP menu has the following sub-menus:
USER menu
This menu allows you to register items used
frequently. This menu can contain up to 60 pages. You
can add or delete items using the USER MENU
CUSTOMIZE menu.
USER MENU CUSTOMIZE menu
This menu allows you to add desired menu pages or
items, or delete them to suit your needs.
For detailed information, see “4-5 Using the USER Menu”
on page 4-11(E).
OPERATION menu
This menu contains items for markers and character
displays in the viewfinder whose settings need to be
changed during normal operation by a camera
operator.
Ordinarily, when the DISPLAY switch is set to MENU
this menu will be displayed.
For details on adjustments and setup to be performed using
this menu, see “4-6 Setup Using the OPERATION Menu”
on page 4-15(E).
PAINT menu
This menu contains items for when precise image
adjustment is being performed by observing the
camera’s output waveforms using a device such as a
waveform monitor.
Setting up the camera for the items of this menu can be
performed using an external remote control panel or
master setup unit, but this menu itself is convenient
when the camera is used outdoors in a stand-alone
configuration. This menu is about the same as the
MSU-700A/750 PAINT menu.
For details on adjustments to be performed using this menu,
see “4-7 PAINT Menu”on page 4-24(E).
MAINTENANCE menu
This menu contains items that are not used in daily
operations. About the same as the MSU-700A/750
MAINTENANCE menu.
FILE menu
This menu is used for file operations, such as writing
and clearing reference files, OHB files, lens files, and
Operator Preset files.
DISPLAY switch
STATUS/CANCEL switch
MENU SEL knob/ENTER button
< TOP MENU >
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
cUSERS
USER MENU CUSTOMIZE