Sony HDC-F950 - Manual (Page 88)

Chapter 3 Preparations
3-4(E)
Chapter 3 Preparations
3-3 Attaching a Lens
The procedure for attaching a lens to the camera is as
follows. For information on handling lenses, refer to the lens’
operation manual.
1
Push the lens fixing lever upwards and remove the
lens mount cap from the lens mount.
2
Align the lens’ alignment pin with the notch in the
upper part of the lens mount and insert the lens into
the mount.
3
While supporting the lens, push the lens fixing
lever downwards to secure the lens.
4
Connect the lens cable to the LENS connector.
5
Secure the lens cable with the cable clamp.
1,3 4 2 5