Sony HDC-F950 - Manual (Page 75)

Chapter 2 Locations and Functions of Parts
Chapter 2 Locations and Functions of Parts
2-1(E)
2-1 Accessory Attachments
Chapter 2 Locations and Functions of Parts
1 Shoulder strap fitting post
Attach one end of a shoulder strap to this fitting post,
and the other end to the fitting post (see page 2-8(E))
on the other side of the camera.
2 Viewfinder front-rear positioning lever and lock
knob
Loosen the lever and knob to adjust the viewfinder
position towards the front or rear.
3 Viewfinder left-right positioning lever
Loosen this lever to adjust the viewfinder position
towards the left or right.
4 Lens cable clamp
Used to secure the lens cable.
5 Lens fixing lever
Used to secure the lens (not supplied) in the lens
mount.
6 Lens mount cap
Cover the lens mount with this cap when a lens is not
attached. The cover may be removed by moving the
lens fixing lever upwards.
7 Lens mount
Used to attach a lens (not supplied).
8 Tripod mount
Attach the VCT-14 Tripod Adaptor when mounting
the HDC-F950 on a tripod.
9 LENS connector (12-pin)
Connect the lens cable. The camera can control the
lens functions through this cable.
1 Shoulder strap fitting post
2 Viewfinder front-rear positioning lever
and lock knob
3 Viewfinder left-right positioning lever
4 Lens cable clamp
5 Lens fixing lever
6 Lens mount cap
7 Lens mount
9 LENS connector
Grip
8 Tripod mount
Shoulder pad