Sony HDC-F950 - Manual (Page 119)

Chapter 4 Adjustments and Settings for Recording
Chapter 4 Adjustments and Settings for Recording
4-25(E)
a) STANDARD
1: INITIAL GAIN 3.5 (equivalent to ENG camcorder)
2: INITIAL GAIN 4.0 Low ( equivalent to EFP camera)
3: INITIAL GAIN 4.0 High (equivalent to EFP camera)
PAINT menu items
Page Setting item Allowable settings Description
SW STATUS FLARE ON, OFF Turns flare correction on or off.
GAMMA ON, OFF Turns gamma correction on or off.
BLK GAM ON, OFF Turns black gamma correction on or off.
KNEE ON, OFF Turns knee correction on or off.
WHT CLIP ON, OFF Turns white clipping on or off.
DETAIL ON, OFF Turns the detail signal on or off.
LVL DEP ON, OFF Turns the level depend function of the detail signal on or off.
SKIN DTL ON, OFF Turns the skin detail on or off.
MATRIX ON, OFF Turns linear matrix correction on or off.
VIDEO LEVEL WHITE R,G,B –99 to 0 to 99 Adjusts the white level of R, G, and B.
BLACK R,G,B,M –99 to 0 to 99 Adjusts the R, G, B, and master black level.
FLARE R,G,B –99 to 0 to 99 Adjusts the R, G, and B flare level.
GAMMA R,G,B,M –99 to 0 to 99 Adjusts the R, G, B, and master gamma correction curve.
V MOD R,G,B,M –99 to 0 to 99 Adjusts the R, G, B, and master V modulation shading.
FLARE ON, OFF Turns the flare correction circuit on or off.
V MOD ON, OFF Turns the V modualtion shading on or off.
TEST 1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
GAMMA LEVEL –99 to 0 to 99 Sets the R, G, B, and master gamma correction curve.
COARSE 0.35 to 0.90 Sets the master gamma correction curve step by step (in 0.05
steps).
TABLE STANDARD Selects the gamma table.
1, 2, 3, 4, 5, 6 a)
USER 1, 2, 3, 4, 5
GAMMA ON, OFF Turns the gamma correction function on or off.
TEST 1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
BLK GAMMA RGB LEVEL –99 to 0 to 99 Adjusts the R, G, B, and master black gamma.
RGB RANGE 1, 2, 3, 4 Sets the upper limit of the video level which the RGB black
gamma affects.
ON, OFF Turns the RGB black gamma correction function on or off.
Y LEVEL –99 to 0 to 99 Adjusts the Y black gamma to adjust the contrast without
changing the chroma phase of the dark part.
Y RANGE 1, 2, 3, 4 Sets the upper limit of the video level which the Y black
gamma affects.
ON, OFF Turns the Y black gamma correction function on or off.
TEST 1, 2, OFF Selects the test signal.
1: Outputs the analog test signal
2: Outputs the digital test signal
OFF: Does not output any test signal
4: INITIAL GAIN 4.0 (equivalent to SMPTE-240M)
5: INITIAL GAIN 4.5 (equivalent to ITU-709)
6: INITIAL GAIN 5.0