Sony HDC-F950 - Manual (Page 110)

Chapter 4 Adjustments and Settings for Recording
4-16(E)
Chapter 4 Adjustments and Settings for Recording
4-6 Setup Using the OPERATION Menu
4-6-1 Selecting Display Items
Selection of items to be displayed on the viewfinder
screen is done using the VF DISPLAY page of the
OPERATION menu. Display of each item can be set
to ON or OFF independently.
Use the following procedure to select items to be
displayed on the viewfinder screen.
1
Set the DISPLAY switch to MENU.
The OPERATION menu will be displayed on the
viewfinder screen.
2
Rotate the MENU SEL knob/ENTER button to
display the VF DISPLAY page, and push the
MENU SEL knob/ENTER button.
VF DISPLAY page
The current setting of each item appears to the
right of the item.
The display items which may be turned on or off
using the VF DISPLAY page are:
Item Contents
EX Extender indicator
ZOOM Zoom position indicator
FOCUS Focus position indicator
ND Type of the ND filter
CC Type of the CC filter
IRIS Iris opening indicator
WHITE White balance memory indicator
D5600K D5600K mode indicator
GAIN Gain indicator
SHUTT Shutter speed, mode, and read mode
indicator
BATT Power voltage indicator
RETURN Type of the return signal
MESSAG Message indication
ALL: To indicate all the messages
WRN: To indicate warning messages and
higher
AT: To indicate the auto setup information
and higher
OFF: Not to indicate any message
3
Rotate the MENU SEL knob/ENTER button to
align the arrow marker (
c) with the item to be
changed, and push the MENU SEL knob/ENTER
button.
The arrow marker ( c) will change into a question
(?) mark.
4
Rotate the MENU SEL knob/ENTER button to
change the setting to the desired value, and push
the MENU SEL knob/ENTER button.
The question (?) mark will change back to the
arrow marker (
c) and the new setting will be
saved.
5
To change other settings, repeat steps 3 and 4 .
6
To end menu operations, set the DISPLAY switch
to ON.
The menu display disappears from the viewfinder
screen, and the display indicating the current status of
the camera appears along the top and bottom of the
screen.
DISPLAY switch
MENU SEL knob/ENTER button
<VF DISPLAY> 1
EX : c ON BATT : OFF
FOCUS : OFF RETURN: ON
ZOOM : OFF
ND : ON
CC : ON
IRIS : ON MESSAG: ALL
WHITE : OFF
D5600K: ON
GAIN : ON
SHUTT : ON