2 connections and power supply, 2-1 connections, 2 connections and power supply -2(e) – Sony HDC-F950 User Manual
Page 86: 2-1 connections -2(e), 2(e)
Chapter 3 Preparations
3-2(E)
Chapter 3
Preparations
3-2 Connections and Power Supply
3-2-1 Connections
A VTR, camera control unit, or remote control panel
can be connected to this camera.
Connecting a VTR
You can connect a VTR to the camera, as shown in the
figure below.
Connecting a camera control unit or
remote control panel
You can connect an HDCU-F950 HD Camera Control
Unit, RCP-700-series Remote Control Panel, or
Remote Control Unit, such as RM-B750, to the
camera, as shown in the figure below.
Connecting a camera control unit
HDC-F950
BNC cable
HD SERIAL
LINK A/LINK B OUT
4:4:4-conforming
HD VTR
HDC-F950
FC2-PD50/PD250
Optical Fiber Cable
HDCU-F950
Camera Control
Unit
Microphone
output
Video output
Power input
CCA-5 Connection
Cable
• RM-B750/B150 Remote
Control Unit
• RCP-700-series Remote
Control Panel
Connecting a remote control panel/unit
Functions that can be remotely controlled
Of the camera’s functions executable by menu
operations, the following are also executable by
remote control from a remote control panel or master
setup unit.
• Auto-setup (level adjustment, auto black and white
balance adjustment)
• Clearing scene file or setup file data
• Clearing painting data
• Test signal output
About color bar or test signal output
When performing auto-setup using a remote control
panel or master setup unit, setup may be performed
during the output of a color bar or test signal. After
setup is complete, the color bar or test signal will again
be displayed on the viewfinder screen.
For more information, refer to the System Manual.
HDC-F950