Sony HDC-F950 - Manual (Page 101)

Chapter 4 Adjustments and Settings for Recording
Chapter 4 Adjustments and Settings for Recording
4-7(E)
DIAGNOSIS menu
This menu displays self-diagnosis information.
To return to the TOP menu
The following two methods are available.
• Align the arrow (
c) with TOP on the right top of
each page, then press the MENU SEL knob/ENTER
button.
• Press the STATUS/CANCEL switch toward
CANCEL twice.
The TOP menu is restored.
For details on these menus, refer to the Installation &
Maintenance Manual and System Manual.
4-3-1 Basic Operation of the
Setup Menus
1
Move the DISPLAY switch from OFF to MENU.
The OPERATION menu screen will be displayed.
2
Rotate the MENU SEL knob/ENTER button to
display the desired page.
3
Push the MENU SEL knob/ENTER button.
The setting items for the selected page will be
displayed, with an arrow (
c) marking the currently
selected item.
4
Rotate the MENU SEL knob/ENTER button to
align the arrow marker (
c) with the desired item.
5
Push the MENU SEL knob/ENTER button.
The arrow marker ( c) will change to a question
mark (?) and begin flashing.
6
Rotate the MENU SEL knob/ENTER button to
change the setting value.
When the knob is rotated quickly, the values will
change quickly; when rotated slowly, the values
will change slowly.
To reset a changed value
If you press the STATUS/CANCEL switch toward
CANCEL before pressing the MENU SEL knob/
ENTER button, the setting will be returned to its
previous value.
To interrupt settings
Set the DISPLAY switch to OFF to turn off the
menu screen display.
If the DISPLAY switch is set back to MENU, the
setting before the interruption will be saved.
7
Push the MENU SEL knob/ENTER button.
The “?” mark will change back to the arrow
marker (
c), and the new setting will be saved.
8
To change other setting items on the same menu
page, repeat steps
4 through 7 .
DISPLAY switch
STATUS/CANCEL switch
MENU SEL knob/ENTER button
Page number
<VF DISPLAY> ?
EX : ON BATT : OFF
ZOOM : OFF RETURN: ON
ND : ON
CC : ON
IRIS : ON MESSAG: ALL
WHITE : OFF
D5600K: ON
GAIN : ON
1
SHUTT : ON
FOCUS : OFF
<VF DISPLAY>
EX : ON BATT : OFF
ZOOM : OFF RETURN: ON
FOCUS : OFF
ND : ON
CC : ON
IRIS : ON MESSAG: ALL
WHITE : OFF
D5600K: ON
GAIN : ON
SHUTT : ON c
1