Errors while scanning, Symbology parameter defaults – Symbol Technologies DS6708 User Manual

Page 164

Advertising
background image

13 - 2 DS6708 Digital Scanner Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 13-1

lists the defaults for all symbologies parameters. There are two ways to change the default values:

Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the

Set Default Parameter on page 4-4

.

Download data through the device’s serial port using SSI. Hexadecimal parameter numbers are shown in
this chapter below the parameter title, and options are shown in parenthesis beneath the accompanying
bar codes. See the Simple Serial Interface (SSI) Programmer’s Guide for detailed instructions for
changing parameters using this method.

NOTE

See

Appendix A, Standard Default Parameters

for all user preferences, hosts, and

miscellaneous default parameters.

Table 13-1

Parameter Defaults

Parameter

Parameter

Number

Default

Page

Number

UPC/EAN

UPC-A

01h

Enable

13-6

UPC-E

02h

Enable

13-6

UPC-E1

0Ch

Disable

13-7

EAN-8/JAN 8

04h

Enable

13-7

EAN-13/JAN 13

03h

Enable

13-8

Bookland EAN

53h

Disable

13-8

Decode UPC/EAN/JAN Supplementals (2 and 5 digits)

10h

Ignore

13-9

UPC/EAN/JAN Supplemental Redundancy

50h

10

13-10

Transmit UPC-A Check Digit

28h

Enable

13-11

Transmit UPC-E Check Digit

29h

Enable

13-11

Transmit UPC-E1 Check Digit

2Ah

Enable

13-12

UPC-A Preamble

22h

System Character

13-13

UPC-E Preamble

23h

System Character

13-13

UPC-E1 Preamble

24h

System Character

13-15

Convert UPC-E to A

25h

Disable

13-16

Advertising