Symbol Technologies DS6708 - Manual (Page 62)

5 - 2 DS6708 Digital Scanner Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Decoding Preferences Parameter Defaults
Table 5-5 lists the defaults for decoding preferences parameters. There are two ways to change the default
values:
• Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the
Set Default Parameter on page 4-4 .
• Configure the digital scanner using the 123Scan configuration program (see Chapter 12, 123Scan ).
NOTE
See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies,
and miscellaneous default parameters.
Table 5-5 Decoding Preferences Parameter Defaults
Parameter Parameter Number Default
Page
Number
Decoding Options
Decoding Illumination F0h 2Ah Enable 5-3
Illumination Bank Control F1h 3Bh Full Illumination 5-4
Decode Aiming Pattern F0h 32h Enable 5-5