Symbol Technologies DS6708 - Manual (Page 68)

6 - 2 DS6708 Digital Scanner Product Reference Guide
Connecting a USB Interface
Figure 6-1 USB Connection
The digital scanner connects with USB-capable hosts including:
• Desktop PCs and notebooks
- Apple™ iMac, G4, iBooks (North America only)
- IBM SurePOS terminals
• Sun, IBM, and other network computers that support more than one keyboard.
The following operating systems support the digital scanner through USB:
• Windows
®
98, 2000, ME, XP
• MacOS 8.5 - MacOS 10.3
• IBM 4690 OS.
The digital scanner also interfaces with other USB hosts which support USB Human Interface Devices (HID).
For more information on USB technology, hosts, and peripheral devices, visit
www.symbol.com/usb .
To set up the digital scanner:
1. Connect the modular connector of the USB interface cable to the cable interface port on the digital scanner
(see
Installing the Interface Cable on page 1-3 ).
2. Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port
of the IBM SurePOS terminal.
3. Select the USB device type by scanning the appropriate bar code from USB Device Type on page 6-4 .
USB Series A
Connector
Interface Cable
NOTE
Interface cables vary depending on configuration. The connectors illustrated in Figure 6-1
are examples only. The connectors may be different than those illustrated, but the steps to
connect the scanner remain the same.