Symbol Technologies DS6708 - Manual (Page 58)

4 - 16 DS6708 Digital Scanner Product Reference Guide
Transmit “No Read” Message
Parameter # 5Eh
Scan a bar code below to select whether or not to transmit a No Read message. When enabled, the characters
NR are transmitted when a bar code is not decoded. When disabled, if a symbol does not decode, nothing is
sent to the host.
Synapse Interface
Parameter # F0h, ACh
The auto-detection of a Synapse cable varies in duration depending on the type of Synapse connection. If a
digital scanner is connected to another scanner using a Synapse cable, use the Auxiliary Synapse Port
connection. In all other cases, where the cable is used, the default setting is recommended.
To disconnect and reconnect the digital scanner from a Synapse cable that is connected to a live host via a
Synapse, use the "Plug and Play" setting. Do not change this setting from the default if an on-board wedge
host is enabled.
Enable No Read
(01h)
*
Disable No Read
(00h)
*Standard Synapse Connection
(01h)