Sony DHR-1000 - Manual (Page 18)

18 Getting Started
Hookup 3
Antenna hookup
Make the following connections if you’re using an antenna (if you don’t
have cable TV).
A Use this hookup if you’re using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and
higher)
• UHF-only antenna (you get channels 14 and higher)
• separate VHF and UHF antennas
B Use this hookup if you’re using a VHF-only antenna (you get
channels 2–13 only)
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an
external antenna connector (not supplied) so that you can connect the
cable to the VHF/UHF IN connector. If you have separate cables for
VHF and UHF antennas, you may use a U/V band mixer (not
supplied). For details, see page 92.
VCR
VHF/UHF
B
A
C
UHF
VHF or
or
VHF
UHF
Rear of TV
Match the type of
connector on your
TV: A, B, or C.
VCR
VHF/UHF
VHF
or
or
UHF
VHF
UHF
C
B
A
Rear of TV
Match the type of
connector on your
TV: A, B, or C.
For connector types
B and C, no UHF
connection is
required.