Sony DHR-1000 User Manual
Page 37
37
Getting Started
1
Press MENU, then press the
CURSOR (>/.) buttons to move
the cursor (❚) to SET VCR Plus+
CHANNELS and press EXECUTE.
When using the EASY SET UP
procedure, skip this step.
2
Enter the guide channel number
assigned in the program guide
and press ENTER.
The TV CH column is highlighted.
3
•
If you made Hookup 1, 2, or 3,
enter the actual number on
your TV (and VCR) and press
ENTER.
•
If you made Hookup 4, enter
the cable output channel
(usually 2, 3, or 4) and press
ENTER.
•
If you made Hookup 5, enter
the actual number on your TV
(and VCR) for an unscrambled
channel and press ENTER. For
a scrambled channel, enter the
cable box output channel
(usually 2, 3, or 4) and press
ENTER.
4
Repeat steps 3 and 4 for each
channel whose numbers don’t
match.
5
When you have set all channels,
press EXECUTE to confirm your
channel settings.
6
When you’ve finished, press
MENU to exit.
Number
buttons,
ENTER
CH +/–
MENU
EXECUTE
CURSOR
05/27-37_DHR-1000.13E
01.4.27, 11:23 AM
37