Sony DHR-1000 - Manual (Page 51)

51 Additional Operations
Checking/changing/
cancelling timer
settings
Before you start...
• Turn on your TV and set it to the video channel.
1
Press POWER to turn on the VCR.
2
Press MENU and select TIMER SET/
CHECK.
3
Check the timer settings:
• If you do not want to change or
cancel the settings, press EXECUTE,
then turn the VCR off to return to
recording standby.
• If you want to change or cancel the
settings, press the CURSOR (>/.)
buttons to move the cursor (❚) to the
setting you want to change or cancel.
4
Change or cancel the timer
setting:
• To change the setting, press the
CURSOR (?//) buttons to
highlight the item you want to
change, and reset it using the
CURSOR (>/.) buttons. Then, press
CURSOR / to move the cursor to
the leftmost column.
• To cancel the setting, press the
TIMER CLEAR button on the rear of
the remote commander.
5
Press EXECUTE.
If any settings remain, turn off the VCR
to return to recording standby.
POWER
MENU
CURSOR
EXECUTE
TIMER CLEAR
Tip
• To check the settings, you
can also use the TIMER
CHECK button on the rear
of the remote commander.
Turn on the VCR and press
TIMER CHECK.
The TIMER SET/CHECK
screen appears.