Sony DHR-1000 - Manual (Page 97)

97 Additional Information
Remedy
•
When you play a bilingual tape, select the sound you want by
pressing AUDIO MONITOR.
•
When you play a tape recorded in 12-bit mode, set the AUDIO
MONITOR selector to the track when the sound is recorded.
• Audio from one track only is selected. Press AU MONITOR MAIN/
SUB.
• The tape is defective. Use a new tape.
•
Make sure the TV is set to the channel for the VCR. If you are using
a A/V hookup, set it to video input.
• Make sure the cable box and/or DSS receiver is/are turned on.
• Replace the Cable mouse.
•
Adjust the TV antenna.
•
Check that the protect tab is set to the recording enable position.
•
Make sure the tape has been rewound to the beginning.
•
Select the correct source with the INPUT SELECT or PROG+/-
button(s).
•
Check that the clock is set.
•
Make sure a tape has been inserted.
•
Check that the protect tab is set to the recording enable position.
•
Make sure the tape has been rewound to the beginning.
•
Make sure your timer settings have not already passed the current
time.
•
Check that the decoder is turned on.
•
The clock stops if the power to the VCR is interrupted for more than
30 minutes. Reset the clock and timer.
• Make sure the cable box or/and DSS receiver is/are turned on.
• Replace the Cable mouse.
• Make sure the connections between VCRs are firm.
•
Select the correct input with the INPUT SELECT or CH +/–
button(s).
•
Check that the protect tab is set to the recording enable position.
•
You cannot copy any software having copyright protection signals.
• In the DF (Drop Frame) mode, the time code may skip from 29-frame
to 02-frame.
• There is an unrecorded portion (blank) between recorded portions.
are not recorded in sequence.
• The video heads are dirty. Clean the video heads using the video
head cleaning cassette.
• Time code display may stop when you fast-forward or rewind the
tape.
Symptom
Mixed sound is heard.
Though the tape is recorded in
stereo, playback sound is
monaural.
The playback sound is skipped.
A TV program does not appear.
TV reception is poor.
The tape ejects when you press
r REC.
Nothing happens when you
press r REC.
The timer does not operate.
The picture of the other VCR
does not appear.
The tape ejects when you press
START/PAUSE.
Time codes are not sequential in
the display.
Playback
(continued)
Recording
Timer recording
Editing
(continued)