Rear terminal, Part names and functions rear terminal – Sanyo PLC WXU700A User Manual

Page 10

Advertising
background image

10

Part Names and Functions

Rear Terminal

S-VIDEO IN
Connect the S-VIDEO output signal from video

equipment to this jack (p.18).

AUDIO IN

Connect the audio output signal from video

equipment connected to ⑨ or ⑬ to this jack.
For a mono audio signal (a single audio jack),

connect it to the L (MONO) jack (p.18).

COMPUTER 1 COMPONENT / COMPUTER 

AUDIO IN

Connect the audio output (stereo) from a

computer or video equipment connected to ④,
⑤ or ⑥ to this jack. (pp17, 19)

VIDEO IN

Connect the composite video output signal to

this jack (p.18).

COMPUTER IN 1 / COMPONENT IN

Connect output signal from a computer, RGB scart

21-pin video output or component video output to

this terminal (pp.17,19).

AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack

(pp.17-19).

This terminal outputs sound from AUDIO IN terminal

(⑪ or ⑫).

LAN Connection Terminal

Connect the LAN cable (refer to the owner’s manual

of “Network Set-up and Operation”).

USB Connector (Series B)

In order to operate the computer with the remote

control and use the PAGE

▲▼

buttons on the

remote control during a presentation, connect the

USB port of the computer to the USB terminal with a

USB cable (not supplied) (p.17).

USB Connector (Series A)

Connect the USB menory (refer to the owner’s

manual “Network Set-up and Operation”).

CONTROL PORT
When controlling the projector with RS-232C,

connect the control equipment to this connector with

the serial control cable.

R/C jACK

When using the wired remote control, connect

the wired remote control to this jack with a remote

control cable (not supplied).

HDMI

Connect the HDMI signal (including sound signal)

from video equipment or the DVI signal from

computer to this terminal (pp.17, 19).

COMPUTER IN  / MONITOR OUT

– Connect computer output to this terminal (p.17).

– This terminal can be used to output the incoming

analog RGB signal and component signals from

COMPUTER IN 1/COMPONENT IN terminal to the

other monitor (p.17).

*

is registered trademarks of HDMI

Licensing, LLC.

*

Advertising