Sanyo PLC WXU700A - Manual (Page 57)

57
Setting
On start
When this function is set to
On, the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
 Note:
Be sure to turn off the projector properly (see "Turning Off
the Projector" on page 23). If the projector is turned off
in the incorrect sequence, the On start function does not
work properly.
Closed caption
Closed caption is a printed version of the program sound or
other information displayed on the screen. If the input signal
contains closed captions, you can turn on the feature and
switch the channels. Press the Point ▲▼ buttons to select
Off, CC1, CC, CC3 or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
Closed Caption
 Note:
The Closed Caption is available only under the situation
below.
• When the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on
Auto.
• The system must be set on NTSC or Auto in Video
System Selection. (p.42)
• The icon of Closed caption is displayed in gray while it
is not available.
• The Closed caption is unavailable when On-Screen
menu and P-Timer are displayed, and Picture in
Picture is active.
Press the Point ▲▼ buttons to select
Off, CC1, CC, CC3 or CC4, and then
Press the SELECT button.