Sanyo PLC WXU700A - Manual (Page 43)

43
Image Select Menu
Select the desired image mode among Dynamic, Standard,
Cinema, Blackboard (Green), Colorboard, Image 1,
Image , Image 3 and Image 4 by pressing the IMAGE
button on the remote control.
Standard
Picture mode adjusted with fine tone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection
Blackboard (Green)
Dynamic
Standard
Remote Control
IMAGE button
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in the Image
adjust Menu (see pages 44-45). This Image memory is
provided in each computer, component and video input
source.
1

Menu Operation
Image 1
Image 
Image 3
Image 4
Colorboard
Colorboard
Use the Point ▲▼ buttons to select Colorboard and then
press the Point ► or the SELECT button. Use the Point
▲▼ buttons to select the desired item and then press the
SELECT button.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Press the MENU button to display the On-Screen Menu.
Use the Point ▲▼ buttons to select Image select and
then press the Point ► or the SELECT button.
Use the Point
▲▼ buttons to select the desired item
and then press the SELECT button.
Video Input
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.