Sanyo PLC WXU700A - Manual (Page 12)

1
Part Names and Functions
㉘ NETWORK button
Select the Network input. See the owner's manual of “Network Set-up and
Operation” and owner's manual of "Memory viewer function".
 Note:
To ensure safe operation, please observe the
following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any chemical material.
Remote Control
①
⑧
⑮
⑪
⑤ ②
⑨
⑩
⑭
⑰
⑥
⑦
⑫
⑬
⑯
④
② ON/STAND-By button
Turn the projector on or off. (pp.21-23)
⑥ HDMI button
Select the HDMI input source. (pp.28,41)
⑦
COMPUTER button
Select the COMPUTER input source. (pp.30-31, 41)
⑭ PAGE ▲▼ buttons
Scroll back and forth the pages on the screen when giving a presentation. To use
these buttons, connect the projector and your computer with a USB cable. (pp.10,
17)
⑧ INFO . button
Operate the information function. (p.63)
⑯ D .ZOOM +/- buttons
Zoom in and out the images. (pp.28, 39)
⑪ MENU button
Open or close the On-Screen Menu. (p.24)
⑰ RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for
power saving when it is not used. Slide this switch to “RESET” to initialize the
remote control code or switch Spotlight and Pointer to the Laser pointer function.
(pp.13-14)
⑳ IMAGE button
Select the image mode. (pp.29,36,43)
㉑ MUTE button
Mute the sound. (p.27)
⑨ KEySTONE button
Correct keystone distortion. (pp.26, 49)
⑩ Point ▲▼◄► ( VOLUME + / – ) buttons
–Select an item or adjust the value in the On-Screen Menu. (p.24)
–Pan the image in the Digital zoom + mode. (p.39)
–Adjust the volume level. (Point◄►buttons) (p.27)
㉓ NO SHOW button
Temporarily turn off the image on the screen. (p.29)
⑬ LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button within 1 minute. When using this laser pointer for more than 1 minute,
release the LASER button and press it again. (p.14)
– Display the Pointer on the screen. (p.14)
① L-CLICK button
Act as the left mouse button for wireless mouse
operation. (p.15)
④ SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted
from the laser light window or a signal is being sent
from the remote control to the projector.
⑫ FREEZE button
Freeze the picture on the screen. (p.28)
⑮ LAMP button
Select a lamp mode. (pp.28, 58)
㉒ P-TIMER button
Operate the P-timer function. (p.29)
㉔ R-CLICK button
Act as the right mouse button for wireless mouse operation. (p.15)
㉕ SELECT button
– Execute the selected item. (p.24)
– Expand or compress the image in Digital zoom mode. (p.39)
㉖
PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation. (pp.14-15)
㉗
AUTO SET/CANCEL button
– Correct vertical keystone distortion and adjust computer display parameters such
as
Fine sync, Total dots, Horizontal and Vertical position . (pp.26, 48)
– Display the image in USB thumb drive or return to the menu bar in Memory
Viewer menu.
Refer to the owner's manual of "Memory viewer function".
⑤ LASER LIGHT window
A laser beam is emitted from here (p.14).
⑲ SCREEN button
Select a screen mode. (pp.29,38-39,46)
㉙ VIDEO button
Select the VIDEO input source. (pp.28,40)
⑱ PIP button
Operate the Picture In Picture function. (pp.28,55)
㉑
㉒
㉔
⑳
㉓
㉕
㉖
㉗
㉘
⑱
⑲
㉙
③
③ WIRED REMOTE jack
Connect the remote control cable(not supplied)
to this jack when using as a wired remote control.
Wireless remote control does not work when the
remote control cable is connected to the projector.