Sanyo PLC WXU700A - Manual (Page 42)

4
Video Input
Video System Selection
1
AV System Menu (Video or S-video)
AV System Menu (Component)

If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select
a specific component video signal format among 480i, 575i,
480p, 575p, 70p, 1035i and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-video
Component
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Auto
 Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
HDMI
Video
S-video
Network Wired 1
Video
Component
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Video , S-video
or Computer 1(Component) and then press the
SELECT button.
3 Use the Point ▲▼ buttons to select System and then
press the Point ► or SELECT button. Use the Point ▲
▼ buttons to select the desired system and then press
SELECT button.