SOYO SY-7VCA - Manual (Page 25)

Hardware Installation SY-7VCA
21
2-2 UNPACKING THE MOTHERBOARD
When unpacking the Motherboard, check for the following items:
u The SY-7VCA VT82C694X AGP/PCI Motherboard
u This Quick Start Guide
u The Installation CD-ROM
u SOYO 3-in-1 Bonus Pack CD-ROM (Norton AntiVirus,
Ghost and Virtual Drive)
u One IDE Device ATA 66 Flat Cable
u One Floppy Disk Drive Flat Cable
Warning: Do not unpack the Motherboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your Motherboard may be damaged by
electrostatic discharge. To avoid permanent damage to components ground
yourself while working by using a grounding strap. Otherwise, ground
yourself frequently by touching the unpainted portion of the computer
chassis to drain the static charges.
Handle the Motherboard carefully, holding it by the edges.
You are now ready to start the installation.