SOYO SY-7VCA - Manual (Page 27)

Hardware Installation SY-7VCA
23
2-3.1 CPU Installation
Your SY-7VCA motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Socket 370 CPU
connector on the motherboard.
Mark your CPU Frequency: Record the working frequency of
your CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0) 466MHz (66x7.0) 533MHz (66x8.0)
433MHz (66 x 6.5) 500MHz (66x7.5)
FSB 100MHz
500MHz (100 x 5.0) 600MHz (100 x 6.0) 700MHz (100 x 7.0)
550MHz (100 x 5.5) 650MHz (100 x 6.5) 750MHz (100 x 7.5)
800MHz (100 x 8.0)
FSB 133MHz
533MHz (133 x 4.0) 666MHz (133 x 5.0) 800MHz (133 x 6.0)
600MHz (133 x 4.5) 733MHz (133 x 5.5) 866MHz (133 x 6.5)
CPU Mount Procedure: To mount the Celeron TM processor that you
have purchased separately, follow these instructions.
1. Lift the socket handle up to a vertical position.