SOYO SY-7VCA - Manual (Page 44)

Hardware Installation SY-7VCA
40
5. CD Line-in (CDIN1,CDIN2)
This Motherboard provides two CD-Line in connectors. Please connect the
4-pin audio cable from your CD-ROM drive to either CDIN1 or CDIN2.
(It fits in only one, depending on the cable that came with your CD-ROM
drive)
Please install according to the following pin assignment:
2-3.3.6 AGP VGA Card
Insert the AGP VGA card into the AGP slot. Then connect the monitor
information cable to the AGP card back plane external connector.
Follow the manufacturer's instructions to perform the AGP VGA drivers
installation.
CDIN1
Right Left
GND GND
1 2 3 4
CDIN2
CDIN1,CDIN2(CD Line-in)
Pin Assigment
Right
Left
GND
GND
1 2 3 4