SOYO SY-7VCA - Manual (Page 63)

BIOS Setup Utility SY-7VCA
59
3-1.4 Quick CPU Frequency Setup (Continued)
Quick CPU
Frequency
Setup Setting Description Note
Normal Default Vcore voltage
Adjust
+1.5 %
+3.0 %
+4.5 %
+6.0 %
+7.5 %
+9.0 %
+10.0% The CPU notifies the board of what core voltage
it requires by its VID outputs. The on-board
voltage regulator uses the VID code to set the
core voltage. If the Vcore Voltage Adjust is set to
normal, the Vcore will be exactly what the VID
code specifies. If an adjustment percentage is
selected the Vcore will be that percentage higher
than the VID code specifies. For instance the CPU
VID code specifies 2.0V and the Vcore Voltage
adjust is set to +10.0% the actual CPU Voltage
will be 2.2V. This function should only be used if
the CPU is running on FSB Frequencies beyond
the CPU specifications, note that SOYO does not
guarantee system stability if this item is not set to
normal.
3-1.5 Processor Number Feature
Setting Description Note
Disabled Default Processor
Number
Feature
Enabled
Setting this item to enabled will allow
application programs to read the ID-
code in your Pentium III CPU,
disabling this item will not allow any
program to read the CPU ID code.
3-1.6 Quick Power On Self Test
Setting Description Note
Disabled Quick Power
On Self Test
Enabled Provides a fast POTS at boot-up. Default