SOYO SY-7VCA - Manual (Page 80)

BIOS Setup Utility SY-7VCA
76
3-5.6 Onboard Parallel Ports
Onboard Parallel
Ports Setting Description Note
Disabled
378/IRQ7
Default
3BC/IRQ7
Onboard Parallel
Port
278/IRQ5
Choose the printer I/O
address.
Normal Default
EPP
ECP
Parallel Port Mode
ECP+EPP
The mode depends on your
external device that
connects to this port.
If [Parallel Port Mode] is set to [ECP] mode
3 Choose DMA3 Default ECP Mode use
DMA
1 Choose DMA1
If [Parallel Port Mode] is set to [EPP] mode
EPP 1.9 Select EPP port type 1.9 Parallel Port EPP
TYPE
EPP 1.7 Select EPP port type 1.7 Default
3-5.7 Onboard Legacy Audio
This field controls the onboard legacy audio.
Setting Description Note
Disabled Onboard
Legacy Audio
Enabled
Set this item to Enabled if using
software (like DOS games) that needs
a ‘legacy’ audio device.
Default
Disabled Default Sound Blaster
Enabled
Set this item to enabled if your on-
board audio-chip is sound Blaster
compatible.
220H Default SB I/O Base
Address Select the base address for your
sound Blaster (SB) compatible Audio
IC.
IRQ 5 Default SB IRQ Select Select the IRQ your SB Audio IC
uses.
DMA1 Default SB DMA Select Select the DMA channel your SB
Audio IC uses.