SOYO SY-7VCA - Manual (Page 66)

BIOS Setup Utility SY-7VCA
62
3-2.2 Hard Disks Type & Mode
Choose the type and mode for the hard disks that you have already
installed.
Primary
(Secondary)
Master & Slave Setting Description Note
IDE HDD Auto-
Detection Press
Enter To auto-detect the HDD’s size,
head … on this channel
Auto BIOS detects hard disk type
automatically. Default
User User defines the type of hard disk.
IDE Primary
Slave
(User Type)
None
Auto BIOS detects hard disk mode
automatically. Default
Normal Normal IDE hard disk <528MB
LBA Enhanced IDE hard disk >528MB
Access Mode
Large Large IDE hard disk (for certain
hard disk)
Note: If you have any questions on your hard disk type or mode, ask
your hard disk provider or previous user for details.
3-2.3 Floppy Drives
Floppy Drives Setting Description Note
360KB, 5.25 in.
1.2MB, 5.25 in.
720KB, 3.5 in.
1.44MB, 3.5 in.
Default
2.88MB, 3.5 in.
Drives A & B
None Not installed
Disabled Default Floppy 3-Mode
Support
Drive A
Drive B
Both Supports 3-mode
floppy diskette:
740KB/1.2MB/
1.44MB on selected
disk drive. Special disk drive
commonly used in
Japan