SOYO SY-7VCA - Manual (Page 78)

BIOS Setup Utility SY-7VCA
74
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-5.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled Turn off the on-board
IDE On-Chip PCI IDE
Ø Primary
Ø Secondary
Enabled Use the on-board IDE Default
mode 0-4 0 is the slowest speed
4 is the fastest speed IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø
Secondary Slave PIO
Auto For better performance
and stability, we suggest
you use the Auto setting
to set the HDD control
timing. Default
Disabled IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
Auto Select Auto to enable
Ultra DMA Mode
support. Default
3-5.2 Keyboard Controls
Keyboard Controls Setting Description Note
PCI Slot Default Init Display First
AGP
Choose which card – AGP
Display card or PCI VGA card –
to initialize first.
3-5.3 IDE HDD Block Mode
Setting Description Note
Disabled IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function. Default