Sony MDX-C8500X - Manual (Page 22)

22
2 1
3
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
centre of the sound field no matter where you
sit in the car.
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until “POS”
appears.
3
Press either side of (SEEK/AMS) to select
the desired listening position.
Each time you press (SEEK/AMS), the item
changes as follows:
All y Front y Front-R y Front-L y Rear y
off y All
To cancel the POS mode, select “off.”
After three seconds, the display returns to
the normal playback mode.
Adjusting the equalizer curve
1
Press (MENU).
2
Press either side of (DISC/PRST)
repeatedly until “EQ Tune” appears,
then press (ENTER).
3
Press either side of (SEEK/AMS) to select
the desired equalizer curve, then press
(ENTER).
Each time you press (SEEK/AMS), the item
changes as follows:
Rock y Vocal y Groove y Techno y Custom
y off y Rock
4
Select the desired frequency and level.
1 Press either side of (SEEK/AMS) to
select the desired frequency.
Each time you press (SEEK/AMS), the
frequency changes as follows:
62 Hz y 157 Hz y 396 Hz y 1.0kHz y
2.5kHz y 6.3kHz y 16.0kHz
2 Press either side of (DISC/PRST) to
adjust the desired volume level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
To restore the factory-set equalizer curve,
press (ENTER) for two seconds.
5
Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
Display
window
POS
All
POS
Front
POS
Front-R
POS
Front-L
POS
Rear
POS
off
Centre of sound
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
Cancel