Attenuating the sound – Sony MDX-C8500X User Manual

Page 28

Advertising
background image

28

Other operations

Tip
If your car has no ACC (accessory) position on the
ignition key switch, be sure to press
(OFF) for two
seconds to turn off the clock indication after
turning off the engine.

Changing the operative direction

The operative direction of controls is factory-
set as shown below.

OFF

Rotate the VOL control to
adjust the volume.

Press (OFF) to
turn off the unit.

Press (ATT) to
attenuate the
sound.

Press (DSPL) to display
the memorized names.

Press (SOUND) to
adjust the volume and
sound menu.

To increase

To decrease

If you need to mount the rotary commander
on the right hand side of the steering column,
you can reverse the operative direction.

Press (SOUND) for two seconds while
pushing the VOL control.

Tip
You can also change the operative direction of
these controls with the unit (see “Changing the
sound and display settings” on page 29).

Attenuating the sound

Press (ATT) on the rotary commander or
the card remote commander.
“ATT on” flashes momentarily.

To restore the previous volume level, press
(ATT) again.

Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).

Advertising
This manual is related to the following products: